U.S. Robotics USRxx3453 Serie Schnellinstallationsanleitung Seite 12

Double-click the Modems icon. In the Modems Properties screen,
•
you should see a description for your new U.S. Robotics modem. If
you do not see a description of your modem, see the Note at the
end of this section.
• Click the Diagnostics tab. Make sure that the correct COM port
(modem) is selected.
• Click More Info. You should see a series of commands
and responses from the modem. This means that the installation was
a success. If you do not see commands and responses,
shut down and restart your PC. To determine if your modem is
functioning properly, repeat the steps above. If your modem is still not
working, refer to the "Troubleshooting" section of the User Guide on
the Installation CD-ROM.
Windows NT
• Click Windows Start, Settings, and then Control Panel.
• Double-click the Modems icon. In the Modems Properties screen,
you should see a description for your new U.S. Robotics modem. If
you do not see commands and responses, shut down and restart
your PC. To determine if your modem is functioning properly,
repeat the steps above. If your modem is still not working, refer to the
"Troubleshooting" section of the User Guide on the Installation CD-
ROM.
•NOTE: If your modem is not listed and/or you do not see a series of
commands and responses, make sure that your cables are attached
correctly to your computer. If your modem is still not working, refer to
the "Troubleshooting" section of the User Guide on the Installation
CD-ROM. To verify that your modem is functioning properly, repeat the
steps listed for your operating system.
Support Resources
If you have not fixed your problem after trying the suggestions in the
"Troubleshooting" section of this guide, you can receive additional help via one
of these convenient resources:
1. Visit the U.S. Robotics Web site
Many of the most common difficulties users experience have been
addressed in the FAQ and Troubleshooting Web pages for your specific
product. Your product ID is USRxx3453. You may need to know this to
obtain information on the U.S. Robotics Web site. Go to:
http://www.usr.com/support
10