TRU Components MS-35 Bedienungsanleitung Seite 32

1: ON/OFF
Switch on the control device. The programme set with the jumpers is started. It is executed with
the speed pre-selected by potentiometer and at full brightness. Repeated operation switches
off the device again.
2: Programme selection buttons „1" to „9"
Selection and start of the respective colour sequence; start with basic speed and full brightness
3: Buttons „AV" and „-/--"
Relevant for setting own colours. „AV" leads to increase, „-/--" to reduction of the respective
colour share when setting own colours, see item 7, bottom.
4: „Volume down"/„Volume up" (or control cross left/right)
Brightness of the programme played up/down
5: „Ch+"/„Ch-" (or control cross up/down)
Start of the next or last programme with basic speed and full brightness
6: Forward/reverse/pause/start
Accelerate / decelerate / pause / resume programme
7: Red/green/blue buttons
Mix colour:
Pushing button „AV" briefly first: Colour ratio is increased.
Pushing button „-/--" briefly first: Colour ratio is decreased.
A running programme is terminated.
32