Keypad Operation - TRU Components MS-35 Bedienungsanleitung

b) Keypad operation
Select program
Briefly press the "PRG" button. Then you can use the "UP" or "DOWN" buttons to select the
lighting programme (see chapter 7).
Setting speed
Briefly press the "SPEED" button. Then you can repeatedly press the "UP" or "DOWN" button to
either increase or decrease speed.
Setting the brightness
Briefly press the "DIMM" button. Then you can use the "UP" or "DOWN" buttons to select the
desired brightness.
Switching the controller on/off
hold down the "PRG" button for longer than 3 seconds, this switches the controller and the con-
nected LED strip either on or off.
After the unit is switched on, the lighting programme which was selected with the J1 - J4 jumper
bridges will start automatically. The speed will depend upon the setting of the "S-POT" dial.
30