Technical Specifications Amp 480 - IC Audio AMP 120 Bedienungsanleitung

12. Technical Specifications AMP 480

Type
Model
Mains Voltage
Battery Voltage
Rated Output Power
Maximum Output Power
Outputs
Maximum capacitve load at
100 V output
Inputs
Frequency response
Total Harmonic Distortion
Signal to noise ratio
Controls
Indicators
Real Power consumption at
mains power, rated load and
full output level
Idle state
Current consumption at battery
power, rated load and
full output level
Idle state
Mains fuse
Internal fuses
Dimensions (HxWxD)
Weight
Colour
Mouting options
AMP 120/240/480
Two Zone Power Amplifier
230 V AC ±10%, 50/60 Hz
24 V DC, maximal 10% deviation
Warning! Insert a series fuse 40 Amperes into the 24 V DC feed line
Speaker Output MUSIC/SPEECH: 8 Ohms and 100V
Speaker Output SPEECH: 100 V only
Line-level output: 1V, 600 Ohms
Line-level input: 0.1-0.5-1 V, 47 kOhm, internally selectable by jumper,
factory setting 0.5 V
Microfone input: 1 mV, 250 Ohms, switchable to line level 0.5V
50 Hz to 20 kHz ±3 dB
Less than 1 % at 1kHz and rated power
Line-level input: 80 dB below full level
Microphone input: better than 65 dB below full level
Master Volume
Supply voltage: green LED, Volume Meter: 5 LEDs
T10A (slow blow), 5x20mm
40 A, 10x38 mm
133 x 483 x 385 mm
19-inch rack mountable
EN
15
AMP 480
480 Watts
720 Watts
240 nF
1100 Watts
32 Watts
32 A
0.6 A
about 24 kg
black
ic audio