Technical Specifications Amp 120 And Amp 240 - IC Audio AMP 120 Bedienungsanleitung

11. Technical Sepcifications AMP 120 and AMP 240
Type
Model
Mains Voltage
Batteriy Voltage
Rated Output Power
Maximum Output Power
Outputs
Maximum capacitve load at
100 V output
Inputs
Frequency response
Total Harmonic Distortion
Signal to noise ratio
Controls
Indicators
Real power consumption at mains
power, rated load and
full output level
Idle state
Current consumption at battery
power, rated load and
full output level
Idle state
Mains fuse
Internal fuse
Dimensions (HxWxD)
Weight
Colour
Mounting options
AMP 120/240/480
Two Zone Power Amplifier
AMP 120
115 / 230 V AC switchable, ±10%, 50/60 Hz
24 V DC, maximum 10% deviation
Warning! Insert a series fuse 16 Amperes into the 24 V DC feed line
120 W
180 W
Speaker Output MUSIC/SPEECH: 8 Ohm and 100V
Speaker Output SPEECH: 100 V only
Line-level output: 1V, 600 Ohms
60 nF
Line-level input: 0.1-0.5-1 V, 47 kOhm, internally selectable by jumper,
factory setting 0.5 V
Microphone input: 1 mV, 250 Ohms, switchable to line level 0.5V
50 Hz to 20 kHz ±3 dB
Less than 1 % at 1kHz and rated power
Line-level input: 80 dB below full level
Microphone input: better than 65 dB below full level
Master Volume, Mains Voltage Selector 115 / 230 V
Supply Voltage: green LED, Volume Meter: 5 LEDs
300 Watts
15 Watts
8 A
0.25 A
T2.5A (slow blow), 5x20mm
15 A, 6.3x32mm
88 x 483 x 300 mm
about 10.0 kg
Table top or 19-inch rack mountable
EN
14
AMP 240
240 W
360 W
120 nF
590 Watts
15 Watts
16 A
0.3 A
T6.3 A (slow blow), 5x20mm
20 A, 6.3x32mm
about 13.3 kg
black
ic audio