Troubleshooting; Safety Instructions; Causes Of Errors And Error Rectification - Hama 8USLB Bedienungsanleitung

Troubleshooting

This chapter contains important information for localising and rectify-
ing errors. Observe the information to avoid dangers and material da-
mage.

Safety instructions

WARNING
Observe the following safety instructions to avoid safety risks and
material damage:
► Repairs to electrical devices may only be carried out by spe-
cialists who have been trained by the manufacturer. Improper
repairs can result in significant danger to the operator and
damage to the device.

Causes of errors and error rectification

The following table can be used to localise and rectify minor errors
with the device:
Error
Display is
blank
Device
switches off
suddenly
Possible cause
Device is switched off
The power supply adapter
is not connected correctly
No mains power
Device is faulty
Common static discharges
(from carpet, wool jumpers,
etc.) can cause the product
to switch to standby mode.
Solution
Switch the device
on.
Ensure that the po-
wer supply adapter
is plugged in and
connected to the
device.
Check your fuse
box.
Inform our custo-
mer service depart-
ment.
Restart the device
using the ON/OFF
switch.
GB
52