Switching Bass And Treble Boost On/Off; Connecting Headphones - Silvercrest IAN 285664 Bedienungsanleitung

Switching bass and treble boost on/off
♦ Turn the BASS switch
switch the loudspeaker
♦ Turn the BASS switch
switch the loudspeaker
♦ Turn the TREBLE switch
switch the loudspeaker
♦ Turn the TREBLE switch
switch the loudspeaker

Connecting headphones

DANGER
►
♦ Ensure that the rotary switch
♦ Insert the 3.5 mm jack plug of the headphones into the head-
phone socket
♦ Before placing the headphones on your head, switch the loud-
speaker
NOTE
► As soon as you connect the headphones, the loudspeakers
will be muted.
► The headphone output is passive, which means that the volume
can be controlled using the rotary switch
volume is specified by the computer or audio device. Please
note that headphones may only be connected if the audio device
has the necessary standard volume limitation applied to its
output. Please refer to your audio device instruction manual for
more information.
│ GB │ IE │ NI
■ 8
3
6
3
6
2
6
2
6
Loud music can lead to hearing damage.
Avoid extremely loud sound levels, especially over
long periods of time, when you are using head-
phones.
.
5
on again and carefully increase the volume.
6
to the "ON" position in order to
bass boost on.
to the "OFF" position in order to
bass boost off.
to the "ON" position in order to
treble boost on.
to the "OFF" position in order to
treble boost off.
is in the OFF position.
4
4
, but the maximum
SLB 1.2 D2
6