When You Have Fi Nished - Bosch MSM78 serie Gebrauchsanleitung

• Place the required insert into the carrier
disc. Note the shape and position of the
insert (fi g. D-1a).
• Place the carrier disc onto the pivot on
the base of the bowl.
• Place the drive unit on the bowl with the
pusher inserted (align arrow a on the drive
unit with any catch b on the bowl) and turn
in an anti-clockwise direction until it clicks
into place.
Risk of injury due to sharp blade.
Never insert fi ngers into the fi lling
hole during operation. Always use the
pusher (13) to push ingredients into the
beaker.
• Place the basic unit on the drive unit and
allow to click into place.
• Plug in the mains plug.
• Hold the basic unit and the bowl fi rmly
and switch on the appliance. Set the
required speed.
First switch on the appliance, set the
speed, and then place the food to be
chopped or grated in the bowl.
• Fill the bowl with the food to be chopped
or grated.
• Push the food to be chopped or grated
applying only light pressure on the
pusher.
Do not exert excess pressure onto
the food to be chopped or grated
(e.g. hard cheese) using the pusher
(13), otherwise the appliance may
switch off due to overload, see
»Troubleshooting«.
• Remove the pusher and add the
ingredients through the fi lling opening.
• When you have fi nished processing,
release the On/Off switch.
• Unplug the mains plug
Caution:
Empty the bowl before it becomes
so full that the chopped or grated food
reaches the carrier disc.
Robert Bosch Hausgeräte GmbH
Whisk
For whipping cream, whisking eggs, and
frothing milk (cold milk, max. 8 °C, or hot
milk, approx. 60 °C).
Caution:
Do not insert the whisk without the
gear attachment in the base unit (fi g.
E-3a).
Caution:
Only connect and remove the
drive unit to/from the whisk when the
appliance has come to a complete stop.
Preparation
Fig. E
• Fill the mixing beaker with food.
• Insert the mixer foot into the basic unit
and click into place.
• Push the whisk into the drive unit and
click into place.
• Plug in the mains plug.
• Hold the basic unit and mixing beaker
fi rmly and press the On/Off switch.
• Use the speed control to prevent the
mixed food from spraying out.
• When you have fi nished processing,
release the On/Off switch.
• Unplug the mains plug
When you have fi nished
• Switch off the basic unit and disconnect
the mains plug.
• Removing the mixer foot: Press the
release buttons and remove the basic
unit from the mixer foot.
• Removing the multi-function
accessory and tools:
- Press the release buttons and
remove the basic unit from the drive
unit.
- Turn the drive unit clockwise and
remove from the bowl.
- If using the universal blade: Only
handle and remove the universal
blade using the plastic part.
en
13