Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.2 Mounting instructions
A.
Select a wall or solid vertical surface that can support the inverter.
B.
The inverter uses natural convection for cooling. Allow at least 20cm space above, below and on the sides of the
inverter.
C.
Using the mounting frame as a template, drill 4 holes as illustrated in the following figures.
D.
Fix the mounting frame to the wall with the 4 screws.
E.
Hang the inverter on the mounting frame.
F.
Insert the safety-lock screws to the bottom leg to secure the inverter.
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
