Troubleshooting; Technical Specification - Hendi 221082 Gebrauchsanweisung

Parts
Pusher
Lid with feeding chute
Basket assembly with blade
Bowl
Pulp container
• Dry all parts completely.
Storage
• Always make sure the applaince has already been
disconnected from the electrical wall outlet and
cooled down completely.

Troubleshooting

If the appliance does not function properly, please
check the below table for the solution.
Problem
Motor does not run after being turned ON.
Motor is running with loud noises and great vi-
brations.
Inefficient juicing result

Technical Specification

Item no.: 221082
Operating voltage and frequency: 220-240V~ 50/60Hz
Output power: 700W
Net weight: approx. 13kg
Protection class: class I
Remarks: Technical specification is subjected to change without prior noticification.
Material of different parts
Parts
Housing of motor unit
Bowl
Basket assembly
Grating disc
Description
- Immerse the parts in warm, mild dtergent for about 3 ~ 5 minutes. Never use abrasive cleaning de-
tergent.
- Rince under running water.
- Danger of hand injury! Handle with geat care with blade.
• Reassemble the juicer (See → Assembly)
• Store the appliance in a clean, dry, out of the reach
of the children and pets.
If you are unable to solve the problem, please con-
tact the supplier/service provider.
Possible cause
The appliance does not plug in firmly with the
electrical power outlet.
- The appliance is not well assembled.
- Too many ingredients that clogged inside the
blade in the basket assembly
- Suction feet not have firm contact with the
surface
The cutting blade inside the basket is worn.
Waterproof class: IPX1
Noise level: < 72 dB (A)(Under no load operation)
Dimensions: 250 x 410 x (H) 530 mm
Rotation speed: approx. 3000 rpm
Material
Stainless steel SUS304
Stainless steel SUS304
Stainless steel SUS304
Stainless steel SUS430
Possible solution
Check the plug to confirm the plug in firmly.
- Unplug it and reassemble the appliance cor-
rectly (See → Assembly).
- Unplug. Clear some food & restart.
- Make sure the suction feet have contact with
the surface firmly.
Replacement of the cutting blade inside the
basket.
EN
9