Aux Input - Scansonic PA6000 Bedienungsanleitung

Full scan
The unit can search throughout full range under DAB mode with
display "Scanning...0" on the screen. After full scan, it will display
number of searched stations on screen, store them automatically
and play the 1st searched station.
Manual tune
1. Press DAB/ FM/ AUX to go to DAB+ mode
2. Short press Menu/ Enter to go to Menu, press it again to
display DAB+ frequency.
3. Short press TUN+/ TUN- to adjust frequency between 5A to
13F, then press Menu/Enter to confirm. Screen will display
signal strength where DAB+ is available, press Menu/Enter to
store and play the searched stations. The unit will return from
Manual tune automatically.
4. Repeat above operation to search more stations manually.
FM FUNCTION
Press DAB/ FM/ AUX to go to FM mode, signal strength will be
displayed on screen.
Auto tuning
1. Long press TUNE+ to activate auto tuning upwards at 50KHz
step, the unit will stop searching and play the 1st searched
stations.
2. Long press TUNE- to activate auto tuning downwards at
50KHz step, the unit will stop searching and play the 1st
searched stations.
3. Long press Menu/Enter to activate auto tuning upwards at
50KHz step, the unit will stop searching and play the 1st
searched stations.
Manual tuning
Under FM mode, short press TUNE+/- to step up or down 50KHz.

AUX INPUT

1. Press DAB/ FM/ AUX button to switch to AUX model, screen
will display Aux Input.
8
PA6000