Safety Warnings - Scansonic PA6000 Bedienungsanleitung

SAFETY WARNINGS:

• Read all the instructions carefully before using the unit and
keep them for future reference.
• Retain the manual. If you pass the unit onto a third party make
sure to include this manual.
Use only the power supply listed in the user
!
instructions.
Input: 100 -240V AC ~50/60Hz
Output : 9V DC 1A
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any doubt about
it working normally, or if it is damaged in any way – switch off,
withdraw the mains adapter and consult your dealer.
Location of Unit
• The unit must be placed on a flat stable surface and not
subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit
may fall off or tip over.
• The mains socket must be located near the unit and should be
easily accessible.
• For indoor use only. The apparatus shall not be exposed to
dripping or splashing.
Temperature
• Avoid extreme degrees of temperature, either hot or cold.
Place the unit well away from heat sources such as radiators
or gas/ electric fires.
• Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
• Never place any type of candle or naked flame on the top of
or near the unit.
Moisture
• To reduce the risk of fire, electric shock or product damage,
do not expose this unit to rain, moisture, dripping or splashing.
No objects filled with liquids, such as vases, should be placed
on the unit.
• If you spill any liquid into the unit, it can cause serious damage.
Switch it off at the mains immediately. Withdraw the mains plug
and consult your dealer.
2
PA6000