Operating & Changing The Vaping Modes; Selecting The Operation Mode - VAPANION TAROT NANO Bedienungsanleitung

VAPANION
OPERATING & CHANGING THE VAPING MODES
TAROT NANO

Selecting the Operation Mode

Press and hold the Mode button for three seconds to toggle between Smart VW, VT (Ni 200, VS, TI), TCR, BYPASS,
CCW or CCT modes.
Setting the Smart VW Mode (Variable Wattage)
In the Smart VW mode, the device suggests a power level matching the resistance of the atomizer head, which it
automatically detects. You can either accept this suggestion in the variable watt mode or independently adjust the
required power by pressing the plus or minus button. In VW mode the device is compatible with windings with a
resistance of 0.15 to 5 Ohm.
Setting the CCW Mode (Customized Curve of Wattage)
In the CCW mode, you determine the power curve of the device during wattage controlled vapinging. Here, you can set
the desired output for the pre-heating of the evaporator in the first seconds.
In VW mode, press the Mode button three times to select CCW. While doing so, press the Mode button and the Plus or
Minus button to adjust the watt output. When all modifications are finished, press the Mode button to save and exit.
52