VAPANION TAROT NANO Bedienungsanleitung Seite 50

VAPANION
USING THE DEVICE
TAROT NANO
OLED-Display
After switching on the device, the voltage, resistance value, battery status, temperature and power output are display-
ed on the OLED display. If the device is not used for 20 seconds, the display is switched off; by pressing the Fire button,
you can reactivate the screen.
Hold down the Plus and Minus buttons simultaneously for two seconds to turn the screen display 180 degrees.
Automatic Resistance Detection
As soon as the device has detected the connection with a coil, the resistance is read automatically. The resistance is
also identified when using Kanthal wire; the device switches from TC-Shift mode to watt output.
Locking/Unlocking
With the Tarot Nano switched on, press and hold the Mode button and the Plus button simultaneously for two se-
conds so that the Plus and Minus buttons are locked. "SYSTEM LOCKED" will appear on the display. To unlock, hold
down the Plus button and the Mode button in the same way. "SYSTEM UNLOCKED" will then appear on the display.
48