VAPANION TAROT NANO Bedienungsanleitung Seite 57

VAPANION
OPERATING & CHANGING THE VAPING MODES
TAROT NANO
Setting the CCT Mode (Customized Curve of Temperature)
In the CCT mode, you determine the power curve of the device for temperature controlled vaping. Here, you can set the
desired temperature for the preheating of the evaporator in the first seconds.
In the respective TC mode, press the Mode button three times to set the CCT mode. Hold down the Mode button while
pressing the Plus or Minus button to adjust and confirm the watt output. Press the Mode button again to save your
settings and end the process.
Setting the Bypass Mode
In bypass mode, the direct output voltage is delivered to the atomizer unregulated. The higher the charge of the
battery, the more the output voltage decreases. In this mode, the device can supply coils with a resistance in the
range of 0.15 Ohm to 5 Ohm.
55