VAPANION TAROT NANO Bedienungsanleitung Seite 56

VAPANION
OPERATING & CHANGING THE VAPING MODES
TAROT NANO
2. Setting the temperature: In the TC-Ni/TC-Ti/TC-SS/TCR modes, the temperature can be adjusted by pressing the
Plus and Minus buttons. You can choose between the ranges 100°C to 315°C and 200°F to 600°F. When pressing
the Plus or Minus button, the temperature is increased or decreased by 5°C or 10°C. Press and hold the respective
button to set the desired temperature at a higher speed.
3. Locking/Unlocking the resistance: In the TC-Ni, TC-Ti, TC-SS, and TCR modes, you can lock or unlock the resistan-
ce by simultaneously holding down the Minus and Mode buttons for two seconds. A lock ( ) will appear on the
display. Replacing the atomizer head does not reset the set resistance.
4. Automatic detection of new atomizer heads: To adjust the temperature when inserting a new atomizer head, "OLD
LOAD: -, NEW LOAD: +" appears on the display. If the atomizer head differs from the previous one, select the Plus
button and the resistance will be newly selected. Select the Minus button to leave the preset resistance as is.
54