Selection & Operating Of The Modes; Selecting The Operation Mode - VAPANION REVENGER Bedienungsanleitung

VAPANION
REVENGER

Selecting the Operation Mode

Press and hold the mode button for three seconds each time to toggle between Smart
VW, VT (Ni 200, SS, TI), CCW, CCT, TCR and BYPASS modes.
Setting the Smart VW Mode (Variable Wattage)
In the Smart VW mode, the device suggests a power level matching the resistance of
the atomizer head, which it automatically detects. You can choose between N (normal),
S (soft) and H (high). N is selected by default. In VW mode, the device is compatible
with coils with a resistance of 0.05 to 5 ohms.
Setting the CCW Mode (Customized Curve of Wattage)
In the CCW mode, you determine the power curve of the device during wattage controlled vapinging. Here,
you can set the desired output for the pre-heating of the evaporator in the first seconds. In VW mode, press
the Mode button three times to select CCW. While doing so, press the Mode button and the Plus or Minus
button to adjust the watt output. When all modifications are finished, press the Mode button to save and exit.
54
SELECTION & OPERATING OF THE MODES