Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - Philips Lumea Essential SC1996 Bedienungsanleitung

Ipl-haarentfernungsgerät
Vorschau ausblenden Andere Handbücher für Lumea Essential SC1996:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
Tip: To achieve optimal results on your upper lip, chin and cheeks, stand in front
of a mirror to get a good view of the area to be treated and the 'ready to flash'
light.
Tip: Because of the contours of the jaw, it may be difficult to bring the
integrated safety system into full contact with the skin and to release a flash.
Put your tongue between your teeth and upper lip or puff up your cheeks to
make this easier.
Tip: The reflected light does not harm your eyes. If the scattered light is
unpleasant, close your eyes when you release a flash.

Cleaning and maintenance

To ensure optimal results and a long life for the appliance, clean the
appliance before and after each use and, if necessary, also during the
treatment. The appliance loses its effectiveness if you do not clean it
properly.
Never clean the appliance or any of its parts under the tap or in the
dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Never scratch the light exit window or the metallic frame inside the
body attachment.
Note: Stop using the appliance when it is no longer possible to clean the light
exit window or the attachments.
1
Switch off the appliance, unplug it and let it cool down.
Note: The light exit window becomes hot during use. Make sure it has cooled
down before you clean it.
2
To remove the attachment, grab the projections at the top and
bottom of the attachment and pull gently.
3
If necessary, clean the outside of the appliance with the soft cleaning
cloth supplied with the appliance.
4
Moisten the soft cloth supplied with the appliance with a few drops
of water and use it to clean the following parts:
-
the light exit window
-
the outside surface of the attachments
-
the metallic frames inside the attachments
-
the reddish filter glass inside the precision attachment
Make sure that the electronic contacts do not get wet.
Note: If water does not clean effectively, use a few drops of high-percentage
alcohol to clean the parts mentioned above.
ENGLISH
21

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis