Electrolux EUC25391W Benutzerinformation Seite 34

34 electrolux
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
Door reversibility
Before carrying out any operations, remove
the plug from the power socket. To change
the opening direction of the door, proceed as
follows:
• To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
doors of the appliance during the opera-
tions.
• Open the door with the appliance in the
upright position. Unscrew the screws and
remove the upper door plastic trim.
• Remove the little plastic cover from the
door plastic trim and refit on the opposite
side (d).
• Lay down the appliance back side down.
• Remove the screw of the hinge cover plug
(a) .
• Unscrew the upper hinge and remove it
(b).
• Unscrew the screw and remove the door
stopper (c).
a
• Remove the door.
• Remove using a tool the cover (e), unscrew
the lower hinge pivot (f) and place it on the
opposite side.
• Re-insert the cover (e) on the opposite
side.
• Re-insert the door .
• Pay attention that the front board of the
doors are parallel to the front board of the
top.
• Fix the door stopper on the opposite side.
• Position and fix the upper hinge (that can
be found in the instruction for use bag) on
the opposite side .
• Fix the screw of the new cover hinge (that
can be found in the instruction for use
bag).
d
d
b
c