Helpful Hints - Clatronic ES 2612 Bedienungsanleitung, Garantie

5....-05-ES 2612 + P, CZ
GB
It is also very easy to produce tea or other liquids.
• Please check whether there is enough fresh water in the tank. Press the pump
button to refill the water supply. As soon as the water flows through the brew
head release the pump button and wait until the readiness lamp lights up.
• Swing the steam valve outwards and place a heat resistant jug under the steam
valve. Slowly turn the steam control knob counter clockwise to open the steam
valve completely. Press the pump button.
• Hot water runs now out the steam valve. As soon as the required amount of hot
water is reached, release the pump button and close the steam valve entirely.
• If the readiness lamp switches off before the required amount of water is in the
jug, release the pump button and close the steam valve entirely. Please wait
until the readiness lamp lights up again. You can than proceed to produce hot
water as described above.
• Before carrying out any cleaning or maintenance operations, switch off your
espresso machine pull the plug and leave the machine to cool down.
• This appliance must never be cleaned under running water and must never be
immersed into water. All parts of the housing, including the brew head should
be cleaned only with a damp cloth. Do not use solvents, detergents or abrasive
products to clean the machine. The water tank, drip tray, drip tray cover, filter
and filter-holder can be washed by hand in warm water with normal dishwas-
hing liquids. In case the perforation of the filter is blocked please clean with a
soft brush.
• Please do not clean in dishwasher.
• This appliance should be de-scaled on a regular basis, depending on the fre-
quency of use and the quality of your water (i.e. hardness, mineral contents).
Please note: Use solemnly products recommended for household percolators.
Please use the product according to its description.
• Use the appliance as described under "making espresso" until the tank is
empty. Allow half of the solution to run through the brew head (without coffee
and filter) and the remaining half trough the steam valve.
• Rinse the tank refill it and let 2 – 3 tanks of fresh cold water run through the
system until you all odours of the de-scaling product have vanished.
• Since heat preserves flavour, we advise to preheat the cups.
Filtered or bottled water improves the taste of your espresso. Please do not use
distilled water.
44
02.09.2003 9:09 Uhr
Producing hot water
Cleaning
De-Scaling

Helpful Hints

Seite 44