Listening To Music From Your Bluetooth Component; Playing Back From Your Bluetooth Component - Yamaha MCR-B043 Bedienungsanleitung

LISTENING TO MUSIC FROM YOUR Bluetooth COMPONENT

This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth component (mobile
phone, digital audio player, etc.). Please also refer to the owner's manual of your Bluetooth component.

Playing back from your Bluetooth component

You'll need to perform the pairing operation the first time you use your Bluetooth component with this unit, or if the pairing
settings have been deleted. Pairing is an operation that registers the communicating component (subsequently called "the
other component") with this unit. Once pairing has been completed, subsequent reconnection will be easy even after the
Bluetooth connection is disconnected (+ P. 10). If pairing is not successful, refer to the item "Bluetooth" in
"TROUBLESHOOTING" (+ P. 23).
Yamaha does not guarantee all connections between this unit and Bluetooth component.
• This unit can be paired with up to 4 other components. When pairing with the fifth component has succeeded, pairing data for the
component with the oldest connection date will be deleted.
• While connecting to the Bluetooth component and perform the pairing with another component, the current Bluetooth connection will be
canceled.
1
3
1 5 : 3 0
B T P a i r i n g O K
1
Press the source button for more than 2
seconds to enter pairing mode.
• Pairing mode lasts for 5 minutes.
• In pairing mode, the front panel display of this unit will
indicate "BT Pairing...".
You can also enter pairing mode by holding down SOURCE on
this unit.
2
Perform Bluetooth pairing on the other
component.
For details refer to the owner's manual of the other
component.
3 From the Bluetooth connection list of the other
component, choose this unit (MCR-B043
Yamaha or MCR-B043D Yamaha).
When pairing has been completed, the front panel display
of this unit will indicate "BT Pairing OK".
If you are asked to enter a password, enter the numerals "0000".
4 Connect this unit and your other component
via Bluetooth.
5
Play back music from your Bluetooth
component.
Take care that the volume setting of this unit is not too high. We
recommend that you adjust the volume on the other component.
• If you connect via Bluetooth from your other component while
this unit is in standby (except ECO standby), this unit will
automatically turn on.
• If you disconnect the Bluetooth connection from your other
component while the audio source is set to Bluetooth, this unit
will automatically turn off.
• If Bluetooth is selected as the audio source, this unit will
automatically turn off when 20 minutes have elapsed without any
Bluetooth connection nor any operation performed.
9
En