KERN MPS 200K100M Betriebsanleitung Seite 85

Ensuring perfect fit, put the handrail con-
taining three holes for the display unit on
the handrail butt (1) and cable conduit.
(see fig.)
Using the holders 4 (2x) fasten the hand-
rail to the handrail butts.
Once again, use screws 6 (3x) and
tapped bushes 5 (3x).
Carry out same sequence of operations
for second handrail.
Use the two screws (8) to fasten the
cross strut (3).
Use the three screws to fasten the
mounting plate to the handrail.
MPS / MTS / MXS / MWS-BAPS-e-1710 27