KERN MPS 200K100M Betriebsanleitung Seite 79

Assembly:
Fasten 3 corner elements to the platform, using 4 screws each time.
Place the handrail on 3 corner elements and screw it.
Fasten the terminal holder to the handrail with 3 screws.
Remove the side rubber plugs at both sides of the display.
Fasten the display to the holder with both handwheels.
Adjust the display position with handwheels.
MPS / MTS / MXS / MWS-BAPS-e-1710 21