KERN MPS 200K100M Betriebsanleitung Seite 75

 Introduce cable completely
into the tripod tube (6)
 Reinsert cap (1)
 Screw-in screw (2)
When screwing the screw en-
sure that the plug-in connect-
or inside the tripod foot is not
squeezed.
 Use the 4 screws to attach
the tripod to the bottom of
the balance
MPS / MTS / MXS / MWS-BAPS-e-1710
 Level balance with foot screws until the air
bubble of the water balance is in the pre-
scribed circle.
 Check levelling regularly.
17