Temperature Control For The Coldest Zone In The Fridge - Schneider SFD540NF B Bedienungsanleitung

3. After 10 minutes the acoustic warning signal will be quitted automatically.
The door alarm can also be quitted permanently by closing the corresponding
door.
In order to save energy a prolonged opening of the doors should be avoided.

4.8 Temperature control for the coldest zone in the fridge

D
EPENDING ON MODEL
control for the coldest zone in the fridge.
NOTICE! The
compulsory a part of the appliance described in this instruction manual!
 By using the temperature control (depending on model) you can check regularly
if the temperature in the coldest zone of the fridge corresponds to the
configured settings.
The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
temperature, the amount of food and the frequency of door-openings. When you
set the temperature of the fridge these aspects should be taken into account.
 If the temperature control indicates "OK", the thermostat of the fridge is set
correctly and the temperature in the coldest zone of the fridge is inside a proper
range.
 If the temperature control changes its colour to "WHITE", the temperature
of the fridge is too high.
 In this case decrease the temperature of the fridge.
 Wait 12 hours.
 Check the temperature control again afterwards.
13 depending on model
, some appliances may be equipped with a temperature
temperature
Temperature control:
13
control described
59
below is not