Before Initial Operation - Schneider SFD540NF B Bedienungsanleitung

1
Internal light of the fridge (LED)
2
Door trays
3
Bottle shelf
4
Crispers
5
Glass shelves
6
Break-proof glass covers of the crispers
7
Upper freezer drawer / freezer compartment
8
Lower freezer drawer / freezer compartment
9
Adjustable feet

4.2 Before initial operation

NOTICE! Leave the appliance in an upright position for 4 - 6 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5
or frozen food in the appliance. If you place food in the appliance before
it has reached its normal operating temperature, this foods can thaw and
/ or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait 4 - 6 hours to
ensure proper operation.
4. The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons until the desired values will be
indicated (s. chapter 4.5 S
5. If operation was interrupted, wait 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have
changed the settings before or when you have stored additional food in the
appliance. The duration of this period of time depends on the range of the
SETTING OF THE TEMPERATURE
).
ETTING OF THE TEMPERATURE
F :
RIDGE
F :
REEZER
) before you place any fresh
51
CLEANING AND
).