Herunterladen Inhalt Inhalt Diese Seite drucken

Prior To Initial Use; Applications; Working With The Universal Blade; Working With The Special Blade - Rommelsbacher UZ 400/G Bedienungsanleitung

Universal zerkleinerer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Be careful when processing liquids. Liquids may spout during operation. There is the hazard
of burns with hot liquids!
• The appliance has a delayed motor stop after it has been switched off; therefore please wait
until it has stopped before taking the attachments out of the glass bowl.
• Do not at all operate this unit with an external timer or a separate telecontrol system.
• Place the appliance on a stable and even surface and do not operate it in the vicinity of
sources of heat (oven, gas flame etc.) or in explosive environments, where inflammable
liquids or gases are located.
• Prior to each use, check the appliance and the attachments for soundness, it must not be
operated if it has been dropped or shows visible damage. In these cases, the power supply
must be disconnected and the appliance has to be checked by a specialist.
• Never immerse the base unit and the plug in water for cleaning.
• Pull the mains plug after each use. Never let the cable hang down over the edge of the work
surface so that the appliance cannot be pulled down accidentally.
• Keep the power cord away from hot surfaces, sharp edges and mechanical forces. Check the
power cord regularly for damage and deteriorations. Damaged or entangled cords increase
the risk of an electric shock.
• Do not misuse the power cord for unplugging the appliance.
• This electrical appliance complies with the relevant safety standards. In case of signs of
damage to the appliance or the power cord, unplug the appliance immediately. Repairs may
be effected by authorised specialist shops only. Improper repairs may result in considerable
dangers for the user.

Prior to initial use

For a start, please clean the appliance as well as all attachments. For more detailed information
please refer to "Cleaning and maintenance".

Applications

Working with the universal blade

The universal blade is suitable for ...
... chopping ingredients as herbs, onions, cheese, meat, vegetables, berries, nuts (without peel)
potatoes, vegetables, raw vegetables etc.
... puréeing cooked soups, fruit and vegetables e. g. for baby food.
The universal blade is not suitable for ...
... chopping very hard food as coffee beans, nutmeg, cereals, fruits with pits.
... crushing ice-cubes or frozen food.
Working with special blade
The special blade is suitable for ...
... crushing ice-cubes or frozen food.

Working with the whisking disc

The whisking disc is suitable for ...
... whipping egg whites, cream, mayonnaise, omelette dough, yoghurt etc.
... whisking eggs, sauces and mixed drinks.

Integrated safety system

The appliance features a safety system. A micro switch ensures that the appliance will only work
if the base unit is mounted correctly on the working cover. Together with the observance of this
instruction manual, this ensures a safe operation.
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis