Locking The Keypad; Open Window Detection; Factory Settings; Advanced Settings - SCDI TEMPCO RF CONTROL Bedienungsanleitung

OK. You just created your fi rst Eco period of the day.
Comfort fl ashes on the screen.
7. Advance the time of day using the «+» butt on in steps
of 30 minutes to create your fi rst Comfort mode period.
Press OK. You just created your fi rst Comfort period of the
day. Eco fl ashes on the screen.
8. Repeat the previous steps as many ti mes are you wish
to create as many Eco and Comfort periods as you wishto
have in the same day.
9. When the timer programming reaches the end of the
day, 23:30 fl ashes. Press OK.
10. Day 2 (2=Tuesday) and CP YES appear on the screen.
You can choose to copy the day 1 program to day 2 or not.
11. If you choose to copy the program, press OK. Day 3
(3=Wednesday) and CP YES appear on the screen. Repeat
this step unti l you reach the last day of the week.
12. If you choose not to copy the program, press «+» or
«-», CP no now fl ashes on the screen. Press OK to accept
your choice. You will now have to repeat the programming
steps described above.
13. When you have fi nished programming the last day of
the week, you must save your program. SAVE appears on
the screen. Press OK to save it. You will then automatically
move into Auto mode. (The temperature setpointand pro-
gram number are displayed on the screen).
Important: If you choose a program that has already pre-
viously been customized but which you do not want to
modify, press OK to accept. You will automati cally move
into Auto mode (The temperature setpoint and program
number are displayed on the screen)
Notes: program ranges are displayed in a graphic at the
bott om of the screen and the time segment fl ashes. This
enables you to view an enti re day's program.

LOCKING THE KEYPAD

Use this functi on to avoid making any changes to the
transmitt er setti ngs. To lock the keypad, press «+» and
«-» simultaneouslythen press OK The symbol is displayed
and the keypad is now locked. Repeat the same procedure
tounlock the keypad. The symbol disappears.

OPEN WINDOW DETECTION

The symbol is visible on the screen and disappears
when you have deactivated this functi on in the ad-
vanced settings. When the thermostat detects an open
window, the radiator will switch temporarily to Anti
-frost mode and return toits previous operating mode
aft er the window has been closed.

FACTORY SETTINGS

To reset the thermostat press and hold butt on "B" for
20 seconds. The indicator light fl ashes orange and
then turns stable orange before fi nally going outcom-
pletely. Restart your thermostat by pressing button "B".
The indicator light will fl ash orange rapidly. Your ther-
mostat is now reset.

ADVANCED SETTINGS

Your remote control has an installer menu which allows
you to modify various settings to suit your needs.
Press and hold the OK butt on on the remote control for
10 seconds unti l the installer menu appears "bL no", the
symbol appears. Then press the "+ or -" butt ons to move
through the various setti ngs. You can exit the installer
menu at any time by pressing the back butt on, or going
down to the "End" setting to exit and return to the pre-
vious mode.
Descriptions of the various settings:
o "bL no":
Fan is installed (certain radiator models), set to " no" by
default. To choose a diff erent setti ng, press OK, " no"
fl ashes, use the "+ or -" buttons to change it to "YES",
press OK again to accept.
o "rF INI":
Pairing menu, press "OK" once, "INI" and the symbol
.
fl ash on the screen. Your radiator is currently pairing.
When the screen returns to the previous mode, your
fi rst radiator has been successfully paired.
o "tP no":
Display the ambient temperature, set to " no" by default.
To choose a diff erent setting, press OK, " no" fl ashes, use
the "+ or -" to change it to "YES", press OK again to ac-
cept. In this case, the ambient temperature will always
be displayed on the remote control screen with the sym-
bol and you will have to press to display the setpoint
temperature for 10 seconds.
o "At YES":
Adaptive start time. This function allows you to anti
cipate the starting of your system. You will reach the
setpoint temperature in the room at the desired time.
It is activated when your system changes from eco to
comfort in AUTO mode. It is set to "YES" by default. For a
diff erent setti ng, press OK, "YES" fl ashes. Use the "+ or
-" buttons to change it to "no". Press OK again to accept.
You have now deactivated the adapti ve start time func-
tion.
EN
11