Notes On Documentation; Safety Instructions; Product Description - Rittal DK 7030.111 Installationsanleitung Und Kurz-Bedienungsanleitung

EN
Notes on documentation, Safety instructions, Product description
1

Notes on documentation

This installation and short user's guide is intended for experienced trained specialists and contains only
EN
the most important information concerning the assembly, installation and function of the
CMC III Temperature/Humidity Sensor (subsequently called temperature/humidity sensor).
1.1 Associated documents
CMC III Temperature/Humidity Sensor assembly, installation and user's guide.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the temperature/humidity sensor with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2

Safety instructions

– Assembly and installation of the temperature/humidity sensor may only be performed by experienced
trained specialists.
– The temperature/humidity sensor housing must not be opened.
– The temperature/humidity sensor may not come in contact with water, aggressive or inflammable
gases and vapours.
– The temperature/humidity sensor may only be operated within the specified environmental conditions
(see Section 3.4).
3

Product description

3.1 Functional description
The temperature/humidity sensor is used to measure the temperature and relative air humidity at the
operational location. It provides the temperature and relative air humidity values measured at the con-
nected CMC III PU. The temperature/humidity sensor has an identification that allows it to be detected
automatically by the CMC III PU.
3.2 Proper use
The CMC III Temperature/Humidity Sensor is used only to measure the temperature and relative air hu-
midity in a server enclosure. It may be used only together with the CMC III PU. Any other use is not per-
mitted.
3.3 Scope of delivery
– CMC III Temperature/Humidity Sensor
– Provided accessories (see Fig. 1)
– Installation and Short User's Guide
3.4 Operating conditions
The temperature/humidity sensor may only be operated under the following operating conditions:
Temperature operational range:
Humidity operational range:
Degree of protection:
5
+0°C to +55°C
5% to 95% relative humidity, non-condensing
IP30 in accordance with EN 60 529
Rittal CMC III Temperature/Humidity Sensor