Integra RUBIN HYZ Montage- Und Bedienungsanleitung Seite 40

Rubin HYZ RS 55s, RUBIN HYZ RS 55d,
RUBIN HYZ RS 75s, RUBIN HYZ RS 75d
Consisting of:
• Basic body.
• Measuring insert set (seal, 4x fixing bolts).
• Grab handle (two-part)
• "ST" system separator or "RS" non-return
valve
• Knuckle coupling input 55/75 "s" rigid or "d"
rotatable, each with wide-meshed screen
• Knuckle coupling output 55 rigid
• Installation and operating manual.
3 Installation
NOTICE
Slightly askew installation may result in damage to the meter housing and wa-
ter leaks.
• Meters must be installed without mechanical tension.
NOTICE
Overpressure may result in leaks and can destroy the meter housing
• The pipeline pressure must not exceed the pressure stated on the type
plate.
NOTICE
Non-compliance with the hygiene regulations may result in contamination of
the medium
• Comply with the hygiene regulations.
• Disinfect the meter again prior to installation.
NOTE
In order to achieve a high degree of measuring accuracy, operating conditions
should not exceed the following limits:
40 RUBIN HYZ ST, RUBIN HYZ RS