Wile Bio Moisture Gebrauchsanweisung Seite 9

EN
on the upper edge of the display. Wait
for a moment and the result appears on
the display again. Now each time you
push the MENU- button, 0,1 moisture %
will be added to the result.
- Adjusting the value downwards
When the measurement result is
displayed, push the MENU- button for
three times. Three bars will appear on
the lower edge of the display. Wait for
a moment and the result appears on
the display again. Now each time you
push the MENU- button, 0,1 moisture %
will be deducted from the result.
Note! This adjustment is specific to the
used scale. In other words there may
be defined specific adjustment for each
scale.
3.4.4. Erasing of the scale adjustment
When the moisture content result is
displayed, you can erase the adjustment.
To do that push and hold MENU- button
for about 6 seconds. When the result
value on the display changes, you know
that the adjustment has been erased.
Always make several measurements,
because the moisture content in the
mass can vary greatly.
4. Maintenance of the meter and
battery replacement
4.1. Battery
The meter runs on 9V battery of the type
6F22. The battery is included in the
delivery and is ready for use.