Wile Bio Moisture Gebrauchsanweisung Seite 7

EN
result represents the average quality of
the whole mass by making the
measurement from different places of the
mass. Make several measurements if
needed. Note, that the moisture content in
the same mass can vary greatly.
3.4. Processing the result
3.4.1. Automatic average calculation
The meter can calculate the average
value of several measurements. After you
have made the measurement, the result
can be saved for the average calculation.
Saving the measurement result for the
average calculation
Make the measurement as usual. When
the result is displayed, push shortly the
MENU- button. A will appear on the
display and the meter will add the
measurement result for the average
calculation. The average calculation is
ready when two numbers, for example
A05 and 25,6, appear alternating on the
display.
In this case A05 means, that the number
of measurement results included into the
average value is 5. Number 25,6 is the
average value of those 5 measurements.
If you do not want to include the
measurement result into the average
calculation, don't make anything after the
measurement, just wait until the meter
automatically goes off and is ready for the
next measurement.
Before calculating the average value of
every new lot of material, make sure