Wile Bio Moisture Gebrauchsanweisung Seite 5

EN
the pellet heap and make sure, that the
quality of the collected sample represents
the average quality of the whole mass.
The measurement scale for pellets is
developed for about 6-8 mm thick and 20-
30 mm long wood pellets.
Sawdust
Before collecting the sample remove
some material from the surface. The scale
for sawdust is suitable for all the woods.
3.2. Checking and changing the scale
Before the measurement always
remember to check, if you are using the
correct scale. The complete list of the
scales you can find on the side sticker of
the meter. There is an additional -0- scale
in the meter. -0- scale is used by Wile
service department to calibrate the
meters.
3.2.1. Checking the scale
Switch on the meter with a single press on
the ON/OFF-button. The number of the
present scale, for example -1-, will appear
on the display. If the scale is correct, keep
waiting. You will see run on the display
and in a moment the meter will go off.
Now the meter is ready for use.
3.2.2. Changing the scale
If you need to change the scale, switch on
the meter with a single press on the
ON/OFF-button. The number of the
present scale, for example -1-, will appear
on the display. When the number of the
scale is displayed, you can change the