Adding Or Deleting Modules From A Channel Group - G&D ControlCenter-Compact series Installation Und Bedienung

Expanding switchable signals
The chosen module is assigned to the first KVM channel and is shown in the
gned column. The left column (
can add to the new channel group.
NOTE: You can assign up to seven additional video channels, one USB or
RS232 channel to a console's KVM channel.
You can assign up to seven additional video channels to the KVM channel of the
computer, too. In addition, you can create a
RS 232 channel.
NOTE: All channels of a channel group are switched at the same time.
4. In the left column (
column ( Assigned
NOTE: To change the order of already added channels, mark a channel and
click (arrow down) or
5. Click (arrow right) to assign the module to the chosen channel.
6. Repeat steps 4 and 5 to add another module to the channel group.
7. Click OK to save the new channel group.
NOTE: The user module and the computer modules of the channel group are
marked with a plus sign in the list of modules.
Click the plus sign to view the list of modules.

Adding or deleting modules from a channel group

How to add modules to or delete them from a channel group:
1. In the directory tree, click
or
Target modules
2. Right-click a user module or a computer module that is already assigned to the
channel group to which you want to add another module to orfrom which you
want to delete a module.
3. On the context menu, click
23 · G&D ControlCenter-Compact
Unassigned
Unassigned ), click on the module you want to add. In the right
), click on the channel you want to add the module to.
(arrow up). The chosen channel is moved up or down.
KVM matrix systems > [Name] > User modules
.
Channel grouping
) lists the matrix switch modules you
of four devices for the USB 2.0/
pool
.
Assi-