Compatibility Mode - G&D ControlCenter-Compact series Installation Und Bedienung

Configuring dynamic ports
Variant
ControlCenter-Compact-8C
ControlCenter-Compact-16C
ControlCenter-Compact-16F
ControlCenter-Compact-16F16C
ControlCenter-Compact-32C
ControlCenter-Compact-32F
ControlCenter-Compact-32F-16C
ControlCenter-Compact-32F-32C
ControlCenter-Compact-32F-48C
ControlCenter-Compact-32F-80C
ControlCenter-Compact-48C
ControlCenter-Compact-64C
ControlCenter-Compact-80C
ControlCenter-Compact-128C
ControlCenter-Compact-176C

Compatibility mode

Activating the compatibility mode of matrix switches belonging to the Control-
Center-Compact series is required only if you want to integrate a matrix switch of the
DVICenter series, whose ports are operated in compatibility mode, into the cascade.
NOTE: For matrix switches of the DVICenter series, the compatibility mode has
been automatically activated after an update to firmware version 1.4 or later if the
default port assignments had been manually changed to the
to the update.
ADVICE: Update the firmware version of all matrix switches belonging to a cas-
cade to the latest version. Now deactivate the
switches.
17 · G&D ControlCenter-Compact
Up ports
1 to 2
1 to 4
1 to 4
1 to 8
1 to 8
1 to 8
1 to 12
1 to 16
1 to 20
1 to 28
1 to 12
1 to 16
1 to 20
1 to 32
1 to 44
compatibility mode
Down ports
3 to 8
5 to 16
5 to 16
9 to 32
9 to 32
9 to 32
13 to 48
17 to 64
21 to 80
29 to 112
13 to 48
17 to 64
21 to 80
33 to 128
45 to 176
CON or CPU mode prior
for all matrix