Installing And Connecting User Modules; Connecting Console Devices To User Modules; Connecting User Modules To The Central Module - G&D ControlCenter-Compact series Installation Und Bedienung

Installing and connecting user modules

Connecting console devices to user modules

IMPORTANT:
The Fiber
technology which comply with laser class 1.
They meet the requirements in accordance to
and
U.S. CFR 1040.10
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 3
 Always connect optical connections or cover them with protection caps on page 3
 Only use G&D certified transmission modules on page 3
 Connect the console devices to the different user modules.
The steps required to connect these devices are described in the manual supplied
with the modules:
Manual
Standard variants
Devices with integrated USB
DP-HR variants
DP-HR-U variants

Connecting user modules to the central module

IMPORTANT: Mind the following instructions when installing central modules
with fiber ports:
 Avoid direct eye exposure to beam on page 3
 Always connect optical connections or cover them with protection caps on page 3
 Only use G&D certified transmission modules on page 3
 Connect the Transmission interfaces of each individual user module to one of the
dynamic ports of the central module.
2 4 6 8
Tx Rx Tx Rx Tx Rx Tx Rx
Rx 1 Tx Rx 3 Tx Rx 5 Tx Rx 7 Tx
variants of the user modules use components with laser
.
1040.11
Order number
A9100221
A9100249
A9100259
A9100260
Dynamic Ports
10 12 14 16
Tx Rx Tx Rx Tx Rx Tx Rx
Rx 9 Tx Rx 11 Tx Rx 13 Tx Rx 15 Tx
EN 60825-1:2014 as well as
Download link
http://gdsys.de/A9100221
http://gdsys.de/A9100249
http://gdsys.de/A9100259
http://gdsys.de/A9100260
18 20 22 26
24
17 19 21 23 25
G&D ControlCenter-Compact · 8
Installation
28 30 32
27 29 31