Set Comprises; Intended Use; Warnings And Safety Instructions - ProCharger 4.000 Bedienungsanleitung

• Trickle charging function and overcharge protection
• Reverse polarity protected, short-circuit-proof and spark-proof
• Internal temperature monitoring
• Operating voltage: 220 - 240 V/AC (50/60 Hz)
*depending on the degree of sulphation or deep discharge

5. Set comprises

• ProCharger 4000 charger
• Ring terminal cable

6. Intended use

This charger is designed exclusively for charging lead-acid, lead-gel, lead-fleece
(AGM), calcium, pure-lead and Li-ion vehicle starter batteries with a nominal voltage
of 12 V. The recommended battery capacity is 1.2 Ah to 60 Ah. It is not suitable for
charging non-rechargeable batteries (e.g. zinc-carbon, alkali etc.) or other types of
rechargeable battery (e.g. NiMh) not indicated above. The charger must only be
operated with common domestic AC voltages of 220 - 240 V/AC (50/60 Hz). For
reasons of both safety and official approval (CE), you must not convert and/or modify
the product.

7. Warnings and safety instructions

Please read the operating instructions carefully. They contain important
information on how to operate and use this charger. The operating instructions are an
integral part of the device and must therefore be kept safe. The charger must only be
passed on to third parties together with the operating instructions.
In order to avoid malfunctions, damage or health hazards, please adhere to the
following safety Instructions. If the safety Instructions and the information on proper
use in these operating instructions are deliberately or negligibly ignored, there is a
• Charging clamp cable
• Operating instructions
27