The »Image Adjustments« Menu - G&D Rackconsole-Led 17Hr Installation Und Bedienung

On-screen display
The »Image Adjustments« menu
The Image Adjustments
picture channel. Any settings made in this menu do not affect the PiP channel.
Sharpness
0 ... 24

Gamma
Off

1.8

2.0

2.2

2.4

2.6

Auto Adjust
[Function]
Clock
 Scale
Phase
0 ... 63

Hor. Position
 Scale
Ver. Position
 Scale
7 · RackConsole-LED 17HR
menu lets you adjust various image parameteres of the main
Select a value between 11 and 0 to adjust the blur filter according
to your wishes.
Select a value between 13 and 24 to adjust the sharpness filter
(VGA video signal only)according to your wishes.
No filter is applied by default (12).
You can adjust the gamma correction in steps of 0.2 to a value
1.8
between (light) and
By default, the gamma correction is set to 2.2.
When using this function, the RackConsole auto-adjusts various
image settings to the displayed VGA video signal.
Adjust the pixel clock for the main picture channel.
The range of the scale depends on the VGA video signal.
Adjust the phase of the VGA video signal.
Adjust the horizontal position of the image.
The range of the scale depends on the VGA video signal.
Adjust the vertical position of the image.
The range of the scale depends on the VGA video signal.
2.6
(darker).