Night Mode" - Operation In Night Mode - Tunze 7096 Gebrauchsanleitung

„Night mode" - operation in night mode

This function can be activated in the „Options" field. By placing the photo-electric cell in the illuminated
area of the aquarium lamp, the pulse operation of the connected pumps is also interrupted when the lamp
is switched off. The pumps continue to operate with „Power 1" output. In the morning, when the light is
switched on again, the selected pulse operation of the pumps will start again. Operation in night mode is
possible with every flow programme of Multicontroller 7096.
This function can be activated in the „Night mode" field.
For test purposes hold the photo-electric cell in the beam area of the aquarium lamp until the pumps
start pulse operation. Keep a minimum distance of 30 cm (11.8 in.) from HQI lamps as otherwise damage
caused by light and heat is unavoidable !
Use a clamp holder to permanently fix the photo-electric cell to the tested position in the aquarium - cf.
chapter titled „Attachment of the photo-electric cell / moon light"".
99