Attachment Of Multicontroller 7096 / Photoelectric Cell - Tunze 7096 Gebrauchsanleitung

Attachment
Multicontroller 7096
Use hook-and-loop strips for smooth plastic surfaces, for example.
Adhere the strip on to the housing (5); for this purpose remove the protective foil and press on.
Prior to adhering the strip, please make sure that the surface is clean, free from grease and smooth.
Subsequently, remove the second protective foil and then position and adhere the Multicontroller at the
requested position.
Photo-electric cell / moonlight
Use the hose clamp, the screw and the nut to attach the photo-electric cell / moonlight to the mountig
clamp (6).
Place the photo-electric cell connected in the light cone of the aquarium lighting; see chapter titled "„Night
mode" - operation in night mode" (7)+(8).
59