Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Install batteries
1.
Install batteries to transmitter:
Use a cross-screwdriver to unscrew screw on
transmitter, open battery compartment cover
and insert two „AA"-batteries (check correct po-
larity).
2.
Install batteries to racer:
Turn the battery door knob at 180° and open
battery door.
Operate
1.
Switch power button to ON and place R/C racer
on the ground.
2.
Push forward/backward controlling pole to P1/
P2 for running/accelerating forward with front
lights
on;
push
ning
with
rear
right controlling pole rot turning left/right.
Accelerate (P1)
forward (P2)
Controlling pole
forward/
backward
backward
Operation Instructions Junior Line Scale Cars 1:16
backward
for
lights
on.
Move
Reinsert battery compartment and screw down.
Insert four „AA"-batteries (check correct polarity),
close battery door and turn battery knob to lock
back.
Car power switch
run
OFF
ON
left/
left
Controlling pole
Steering
right
12
Werbung
Inhaltsverzeichnis
