Werbung
Cleaning and care
1. Quick cleaning: Pour warm water
GB
into the jug, add a few drops of
detergent. Mix water and detergent
by turning the speed selector to
"PULSE, ICE CRUSH" briefl y. Finally,
rinse the jug under running water.
Troubleshooting
Troubleshooting
Symptom
The blender does not
switch on.
Disposal
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and
human health and to recycle waste of
electrical and electronic appliances.
20
AEG IFU SB 5700 BK.indd 20
AEG IFU SB 5700 BK.indd 20
2. Thorough cleaning: Turn the
blender off and unplug the power
cord. Wipe the motor housing with
a damp cloth.
Warning! Never immerse the
housing, plug, and cord in water or
any other fl uid.
Cause
Components are not fi xed properly.
The speed selector is not on the right posi-
tion.
The jug is overfi lled.
The plug is not properly connected to the
power outlet.
Power outage.
Functional problem.
Do not dispose appliances marked
with
the symbol
with the household
waste. Return the product to your local
recycling facility or contact your mu-
nicipal offi ce.
3. Remove the lid and jug. Turn the
blade assembly clockwise and re-
move it. Rinse the blade assembly
in water and detergent. Caution!
Handle carefully, the blades are
very sharp! The lid, jug and meas-
uring cup can be washed in the
dishwasher.
Solution
Check if all the components are properly
locked into position.
Choose the appropriate speed. To use PULSE
function, make sure the speed selector is on
PULSE position.
Empty the jug so you do not exceed the
maximum level.
Check the connection of the plug to the out-
let or try another outlet.
Wait until power outage is over.
Contact authorized service.
17.01.14 15:32
17.01.14 15:32
Werbung
