Functional Description; Intended Use; Product Features; Noise/Vibration Information - Bosch PHO 1 Originalbetriebsanleitung

OBJ_BUCH-437-001.book Page 16 Tuesday, September 18, 2007 2:34 PM
16 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.

Intended Use

The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
rebating.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Planing depth scale
2 Depth adjustment knob
3 Sawdust ejector
4 On/Off switch
5 Lock-off button for On/Off switch
6 Belt cover
7 Screw for belt cover
8 Planer base plate
9 V-groove
10 Blade drum
11 Clamping element for blade
12 Fastening screw for planer blade
13 Carbide blade (TC)
14 Allen key
15 Extraction hose ( Ø 35 mm)*
16 Extraction adapter*
17 Chip/dust bag*
18 Parallel guide*
19 Scale for rebating width
20 Locking nut for adjustment of rebating width*
21 Fastening bolt for parallel and beveling guide*
22 Angle stop*
23 Locking nut for angle adjustment*
1 609 929 M00 | (18.9.07)
24 Fastening bolt for rebating depth stop*
25 Rebating depth stop*
26 Drive belt
27 Large pulley
28 Small pulley
*The accessories illustrated or described are not in-
cluded as standard delivery.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 83 dB(A); Sound
power level 94 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
ty K =1.8 m/s .
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
2
=5.8 m/s , Uncertain-
Bosch Power Tools