Product Features; Technical Data; Product Description And Specifications; Noise/Vibration Information - Bosch GUS 12V-300 Professional Originalbetriebsanleitung

OBJ_BUCH-2921-001.book Page 12 Friday, July 1, 2016 1:25 PM
12 | English
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Cordless Universal Cutters
 Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
 Pay attention to live cables when cutting. There is a risk
of electric shock.
 While cutting, never guide your hand in front of the
blade. Danger of injury.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e.g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting flexible, soft materials of
up to 11 mm in thickness, such as carpet, PVC, cardboard,
leather, fabrics and similar materials.
It is suitable for straight and curved cuts.
1 609 92A 2DF | (1.7.16)

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Knurled screw
2 "Cut Control" cutting-line mark
3 Adjustable blade guard (2–11 mm)
4 On/Off switch
5 Handle (insulated gripping surface)
6 Battery pack
7 Battery unlocking button
8 Button for charge-control indicator
9 Battery charge-control indicator
10 Blade
11 Blade screw
12 Guide edge
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Technical Data

Cordless Universal Cutter
Article number
Rated voltage
No-load speed
Cutting capacity/charged battery
1)
(4 mm PVC), approx.
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
3)
– during operation and during
storage
Recommended batteries
Recommended chargers
1) only for 1.5 Ah battery
2) depending on the battery pack being used
3) limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.

Noise/Vibration Information

Noise emission values determined according to EN 60745-1
(no-load operation).
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745: a
2
K=1.5 m/s .
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
GUS 12V-300
3 601 JB2 9..
V= 12
-1
min 700
m 230
2)
kg 1.2 – 1.4
°C 0...+45
°C –20...+50
GBA 10,8V...
GBA 12V...
AL 11.. CV
GAL 12.. CV
2
<2.5 m/s ,
h
Bosch Power Tools