Where To Use Your Gardena Irrigation Valve; Intended Use - Gardena 9V Betriebsanleitung

1. Where to Use Your GARDENA Irrigation Valve

Intended use

Please note
9 V:
The Irrigation Valve 1251 forms part of an irrigation
system in conjunction with the Programming Unit
1242 and the Control Unit 1250.
The Irrigation Valves are intended solely for outdoor use for fully
automatic control of individual irrigation systems. It is a benefit
to arrange a watering system into separate sections in case
of varying watering needs for different plant areas or if there is
insufficient water available for simultaneous operation of the
entire watering system.
The Irrigation Valve is installed upstream in the watering system
(e. g. Pop-up Sprinklers; Micro-Drip-System), for example, in the
ground.
Compliance with the enclosed operating instructions provided by
GARDENA is a prerequisite for proper use of the Irrigation Valve.
24 V:
The Irrigation Valve 1278 forms part of
an irrigation system in conjunction with
the Watering Controller 1276.
15