Fakir HYDRO Gebrauchsanleitung Seite 18

10
11
13
15
18
Water filter box
12
14
• (10) Fill the water tank with
water using the measuring
beaker up to the MAX line.
This corresponds to a
quantity of approx. 0.6 l.
If necessary, add approx.
5-10ml anti-foaming agent
into the water.
Caution:
Only fill water up to
the MAX level line.
Any more water will
cause uncontrolled
water leaks and clog-
ging of the
system.
• (11-12) Put the water filter
insert back into the appli-
ance, fitting it in correctly
and paying attention to the
lateral guides.
• (13) Insert the tank lid in
the tank, firstly fitting the
two noses into the corre-
sponding recesses at the
back, then press down at
the front until it clicks in
position.
• (14) Push the suction pipe
into the opening until you
hear it click in.
• (15) Set the changeover
switch to Vacuum.
filter