Timer Operation - Toshiba MMD-AP0961HFE Betriebsanleitung

TIMER OPERATION

A type of timer operation can be selected from the following three types.
OFF timer : The operation stops after the set time has passed.
Repeat OFF timer : Every time, the operation stops after the set time has passed.
ON timer : The operation starts after the set time has passed.
Timer operation
1
1
Push TIMER SET button.
• The timer display (type) changes every
push of the button.
• SET DATA and timer time displays flash.
2
Push TIME to select "SET TIME".
For every push of
The maximum set time is 72.0 hr.
For every push of
The minimum set time is 0.5 hr.
3
Push SET button.
• display disappears and timer time display goes on.
SETTING
(When ON timer is activated, timer time, ON timer
Clear of timer operation
4
Push CL button.
• TIMER display disappears.
• "Repeat OFF timer" set once resumes. So start again, stop by same timer.
For cancel timer, push
TEMP.
TIMER SET
TIME
FILTER
RESET TEST SET CL
3 4
button, the set time increases in the unit of 0.5 hr (30 minutes).
button, the set time decreases in the unit of 0.5 hr (30 minutes).
CL
button.
ON / OFF
FAN MODE
SWING/FIX VENT
UNIT
OFF
(OFF timer)
are displayed and other displays disappear.)
NOTICE
8
2
OFF ON
(Repeat OFF timer) (ON timer)
No display