Machine Components; Ce Declaration Of Conformity - Collomix Xo 1 Originalbetriebsanleitungc

EN Technical data
Rated power/Current consumption:
Power supply:
Frequency:
No-load speed, first gear
second gear
Rpm under load, first gear
Maximum mixing tool diameter:
Weight w/o mixing tool:
Protection class:

Machine components

1 Release button for ON/OFF switch
2 ON/OFF switch
3 Gear selection switch (for Xo 4/Xo 6 only)
4 Handle frame
5 Handles
6 Ventilation slits
7 Neck of the machine
8 Mixing shaft
9 HEXAFIX adapter / size M14 adapter
10 Mixing tool
Noise/vibration levels
Measured values determined in accordance with
EN 60745. The A-weighted noise level of the
machine is typically:
Sound pressure level
L [dB(A)]
pA
Xo 1 82 dB(a)
Xo 4 87 dB(a)
Xo 6 87 dB(a)
Uncertainty K = 3 dB
Overall vibration level (for mixing of mineral
materials)
Emission level a
Xo 1
Xo 4
Xo 6
Uncertainty K = 1,5 m/s
second gear
Sound power level
L [dB(A)]
WA
93 dB(A)
98 dB(A)
98 dB(A)
[m/s ]
2
n
1,6 m/s
2
2,0 m/s
2
2,0 m/s
2
2
Xo 1
1010 W 1300 Watt
230-240 V 230-240 Volt
50/60 Hz 50/60 Hz
- 925 min - 660 min
-1
- 920 min
- 860 min - 450 min
-1
- 620 min
120 mm 140 (150*) mm
4,2 kg
q / II

WARNING:
The measured values which are provided apply to
new machines. Noise and vibration levels change
with day-to-day use.

NOTE
The vibration level given in these instructions was
measured in accordance with a standardized method
of measurement as defined in EN 60745 and can be
used for the purposes of comparing electrical tools
with each other. It is also suitable for a preliminary
estimation of vibration strain. The vibration level
which is given represents vibration level for the
primary use of the electrical tool. If, however, the
electrical tool is used for any other purposes,
with different plug-in tools or with insufficient
maintenance, the vibration level may vary. This can
result in a significantly higher level of vibration strain
over the work period as a whole.
For a precise estimation of the vibration strain the
times when the machine is switched off have to be
taken into account as well, as do the times when it is
running but is not actually being used. This can result
in a significantly reduced level of vibration strain over
the work period as a whole.

CE Declaration of Conformity

We declare, with sole responsibility, that this
product complies with the following standards or
normative products: EN 50581:2013-02, EN 55014,
EN 61000, EN 60745-1:2009 + EN60745-2-1:2010
in accordance with the provisions of directives
2004/108/EC, 2006/42 EC, 2011/65/EU.
Technical documentation can be requested from:
Collomix GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
Xo 4 Xo 6
1600 Watt
230-240 Volt
50/60 Hz
- 660 min
-1
- 920 min
-1
- 410 min
-1
- 580 min
-1
160 mm
5,2 kg 5,2 kg
q / II
Gaimersheim, 2013-08-07
Alexander Essing
Managing Director
-1
-1
-1
-1
q / II