Gastroback 42639 Bedienungsanleitung Seite 47

Problem
You cannot lock the bean
hopper.
The message »LOCK BEAN
HOPPER« is displayed on the
screen. There is no reaction to
any operating element.
Appliance does not start after
pressing START | PAUSE | CAN-
CEL button
The milling works start but
no ground coffee comes from
grind outlet
The coffee is ground irregularly
with too large pieces.
Reason
Coffee beans are obstruc-
ting the bean hopper lock.
The bean hopper is not
installed or not properly
locked.
Appliance is not plugged
in!
Appliance is
overheated.
Bean hopper is not atta-
ched correctly.
»LOCK BEAN HOPPER«
will be displayed on LCD
screen.
No coffee beans in bean
hopper!
Milling works or bean hop-
per is blocked.
The burr sleeve is missing
or not locked correctly.
The Solution
Remove bean hopper. Remove coffee beans from the
top of the milling works. Re-assemble the bean hopper
and try again.
Ensure assembling the appliance correctly according to
the instructions in section Preparing the Appliance for
Use. Turn the lock of the bean hopper clockwise to lock
the bean hopper properly on the grinder.
Plug power cord into power outlet. Check, whether
power outlet is live.
Remove power plug from power outlet. Leave for 20
minutes to cool down before trying again.
Lock bean hopper into position.
Fill bean hopper with fresh coffee beans.
Remove bean hopper and burr sleeve. Inspect bean hop-
per and milling works for blockage. Remove obstacles.
Replace parts and try again.
Ensure assembling the appliance correctly according to
the instructions in section ›Preparing the Appliance for
Use‹. Do not forget to insert and correctly lock the burr
sleeve.
47