Grinding Into Portafilter - Gastroback 42639 Bedienungsanleitung

stop as soon as you release the START | PAUSE | CANCEL button or Portafilter button.
Tip: The buttons START | PAUSE | CANCEL und Portafilter execute exactly the same func-
tion. You can operate the Portafilter button by pressing the button with the used vessel
(e.g. Portafilter).
5. Take out the ground coffee after the milling works come to a standstill.
WARNING:
Do not leave the appliance unattended, while it is connected to the
power supply. Always unplug the appliance, when it is not in use.
6. If you have finished your work, always unplug the appliance.

GRINDING INTO PORTAFILTER

Portafilters are special filter inserts for semi-automatic and piston-driven espresso machines.
The ground coffee is tamped in the filter. Thus, the volume is reduced to approx. one
third. Because of this, it is quite normal for the correct amount of ground coffee to appear
overfilled in your portafilter.
1. Prepare the appliance as described in Preparing the ›Appliance for Use and Ope-
rating your Design Coffee Grinder Advanced Pro‹.
2. Choose the cradle size that fits your portafilter: 50 to 54 mm or 58 mm.
3. Slide the cradle into position under grind outlet. If installed correctly, the cradle is
secured in place via a magnet.
4. Insert the Portafilter into the cradle.
Tip:
You can grind directly into your Portafilter even if it does not fit into the supplied
cradles. For this, without any cradle attached, hold the Portafilter with your hand under
the grind outlet, while starting the appliance.
SIEBTRÄGER-
HALTER
50-54mm
PUSH
58mm
Tip: You can press the Portafilter button with your finger or by pressing the Portafilter on it.
6. After grinding is finished, remove the Portafilter carefully to avoid spilling the coffee
powder. If you have used the cradle, simply pull the cradle out.
5. Start the grinding operation using the START | PAU-
SE | CANCEL button or Portafilter button. You can use
the automatic mode: only shortly press the button and
let the appliance operate until the set amount is
ground. Alternatively control the grinding manually:
hold the button pressed until the desired amount is
ground. The grinding will stop, as soon as you
release the button.
43